iohda Banner Frontlit Hulk Matte | 126 in × 150 ft

Specifications

• Product: iohda Banner Frontlit Hulk Matte

• Substrate: Coated PVC, frontlit (non-blockout)

• Weight:13 oz/yd² (≈ 440 g/m²)

• Color / Finish: White, matte face; white reverse

• Scrim / Weave: High-tenacity polyester 1000 × 1000 denier, 18 × 18 threads

• Roll Size:126 in × 150 ft (≈ 3.20 m × 45.72 m)

• Ink Compatibility: Solvent, Eco-solvent, UV, Latex

• Finishing: RF/hot-air weldable; sewable; suitable for hems, grommets, pole pockets, and keder

• Environment: Indoor/outdoor signage; weather-resistant construction

• Storage: 64–77 °F (18–25 °C), 35–65% RH; store vertically in tube, away from heat/sunlight

• Packaging: Poly-bagged roll on hard shipping tube with end protection

• Compliance: Fire ratings may vary by lot—request COA if certification (e.g., NFPA/B1/M2) is required

Highlights

• Matte, Low-Glare Surface: Improves readability in bright lighting and for photography.

• High-Strength Scrim: 1000×1000, 18×18 construction resists tearing on large spans.

• Lay-Flat Handling: Low curl for easier loading, panel alignment, and trimming.

• Seam-Reducing Width:126 in roll minimizes seams on wide facades and backdrops.

• Finishing Friendly: Welds cleanly; edges hold grommets and pole pockets without fraying.

Use & Details

• Applications: Building and event banners, billboards, fences (non-perforated), stage/backdrops, retail POP, street-pole banners (with proper hemming).

• Printing Tips: Use the correct ICC profile per ink set; test heat/UV settings; for solvent/eco-solvent, allow proper outgassing before finishing.

• Finishing Tips: Avoid sharp folds; hem and grommet at recommended spacing; for tensioned frames, consider keder or reinforced hems.

• Installation Notes: Account for wind loads; tension evenly to prevent edge curl.

• Handling & Safety: Heavy roll—team lift at 126 in width; wear clean gloves; acclimate material to the print room for best flatness.