


PROMO iohda Plus Shazam Vinyl Matte 54in x 150ft
The iohda Plus Shazam Vinyl Matte 54in x 150ft is a 3.2-mil flexible promotional gloss white vinyl with permanent adhesive. It can be used for both short term indoor and outdoor use.
$192.00
Available Offer
Product Details
The iohda Plus Shazam Vinyl Matte is a 3.2-mil flexible promotional gloss white vinyl with permanent adhesive. It can be used for both short term indoor and outdoor use.
Uses:
A digital inkjet print media for promotional graphics, point of purchase, short term signage, backlit and flat
Face Material:
- Type: Monomeric PVC
- Color and Finish: White Gloss
- Thickness: 3.2 mil ±10% ISO 534-80
- Durability* - unprocessed 3 years outdoor vertical exposure
Adhesive
- Reference AP940
- Type: Permanent
- Min. Appl. Temperature +50°F
- Service Temperature: -40°F / +180°F
- Initial Adhesion 3.1 lbs/in FTM1 on steel
- Final Adhesion 3.8 lbs/in FTM1 on steel
Liner
- Type: Clay Coated Kraft
- Color: White
- Weight: 78# ±10% PP-032 - ISO 536
- Thickness: 5.8 mil ±10% ISO 534
Printing Methods:
Formulated to give excellent inkjet printing results with solvent, eco-solvent, UV and latex printers.
Testing for suitability between media printers and inks is always recommended prior to use.
Shelf Life:
24 months, applicable only to the material delivered by Ritrama which has not undergone further processing, under the under storage conditions as defined by FINAT section 2.5:
• Ideal storage conditions are at a temperature of 68 - 77 °F and 40 - 50 % HR.
• Store in a cool and dry place.
• Do not store close to a heat source or in direct sunlight.
• Keep the material in the original packaging until required for use.
Pay particular attention to the recommended shelf-life and ensure correct stock rotation.
Substrate Preparation:
All surfaces should be thoroughly cleaned and dried prior to applying the film. Handle the films with care to
prevent damage, fingerprints, dirt or other types of imperfections that will show on the finished product.
Application:
A roll or table laminator can be used for a wrinkle and bubble free installation to rigid substrates. It can also be installed by hand with an applicator tool such as a squeegee. Dry application is recommended.
The above information is believed to be reliable, but does not constitute a warranty of any kind. All material should be fully tested by the purchaser to determine suitability of the product’s performance related to the final application requirements and should be used and marketed in compliance with any applicable laws.
Specifications
Adhesive Films
- Width:54in
- Length:150ft
- Finish:Matte
- Face Color:White
- Back Color:White
- Solvent Printing:Yes
- UV Printing:Yes
- Latex Printing:Yes
- Screen Printing:Yes
- Durability:3 years
- Packaging:Carton Box
- Thickness:3mil
- Product Type:Monomeric
- Film Type:PVC
- Liner Weight:140gsm
- Adhesive Color:Clear
- Adhesive Strength:Medium Tack
- Adhesive Base:Solvent Based
- Adhesive Type:Permanent
- Adhesive Film Type:Vinyl
Ratings And Reviews