Specifications

• Type: Perforated one-way vision window vinyl (30/70)

• Base Film: Monomeric calendered PVC, white gloss print face / black back

• Perforation:30/70 (≈ 30% open area, high print area for vivid color)

• Caliper (Face):160 μm (≈ 6.3 mil)

• Adhesive:Clear removable acrylic

• Release Liner:170 gsm, 1-side PE-coated composite (stable feeding & contour cutting)

• Roll Size:54 in × 100 ft (≈ 1.37 m × 30 m)

• Print Compatibility:Eco-solvent, UV, Latex

• Application Surface: Exterior/interior glass and smooth, non-porous windows

• Recommended Overlaminate:Optically clear (perforated-film laminate) for durability and water resistance

• Use Duration: Short- to mid-term window graphics (project & climate dependent)

• Packaging: Core-wound roll; bagged and boxed/carton tube

Highlights

• One-Way Visibility: White/black construction and 30/70 perf deliver bold image outside, view-through from inside.

• Glossy Image Pop: Gloss face supports saturated color and crisp text.

• Clean Handling: PE-coated composite liner tracks flat in printers/cutters and resists liner curl.

• Removable Adhesive: Bonds well to glass yet removes cleanly when the campaign ends.

• Versatile Production: Compatible with Eco-solvent, UV, and Latex workflows.

Use & Details

• Applications: Retail storefronts, office glass, transit/shelter windows, promotional window wraps, seasonal campaigns.

• Printing Tips:

  • Print on white face; use an ICC profile for perforated window film.

  • Increase ink limits as needed for image density (especially for backlit interiors).

  • Allow full dry/cure before laminating or installing.

• Finishing & Install:

  • For outdoor durability and to keep perforations clear, apply an optically clear overlaminate.

  • Install dry on clean, degreased glass (IPA wipe). Use firm squeegee pressure and post-squeegee edges.

  • Trim light gaps at seals/frames to avoid lifting; avoid stretching the film.

• Removal: Lift a corner with plastic scraper, pull low-and-slow; use adhesive remover if residue remains.

• Notes & Safety: Not for front windshields or locations restricted by local vehicle/glazing regulations. Hole diameter/pitch may vary by lot—request a COA if exact geometry is required.