Specifications

• Product: iohda Banner Frontlit Captain Matte

• Construction:Hot-laminated PVC, frontlit (non-blockout)

• Weight:11 oz/yd²

• Color / Finish: White gloss face; white back

• Scrim / Weave: High-tenacity polyester 500 × 500 denier, 9 × 9 thread

• Roll Size:126 in × 150 ft (≈ 3.20 m × 45.72 m)

• Ink Compatibility: Solvent, Eco-solvent, UV, Latex

• Finishing: RF/hot-air weldable; sewable; suitable for hems, grommets, pole pockets, and keder

• Environment: Indoor/outdoor signage; weather-resistant construction

• Storage: 64–77 °F (18–25 °C), 35–65% RH; keep vertically in tube, away from heat/sunlight

• Packaging: Poly-bagged roll on hard shipping tube with end protection

• Compliance: Fire ratings can vary by lot—request COA if specific certification (e.g., NFPA/B1/M2) is required

Highlights

• High-Gloss Pop: Gloss surface boosts saturation and perceived sharpness for eye-catching graphics.

• Strong-Yarn Scrim: 500x500, 9×9 fabric provides robust tear/tensile strength for large installs.

• Wide-Format Friendly:126 in width reduces seams on facades, stages, and arena backdrops.

• Stable Handling: Hot-laminated build offers consistent lay and clean welds.

• Finishing Ready: Holds hems/grommets well; compatible with RF/hot-air welding and sewing.

Use & Details

• Applications: Event and building banners, billboards, retail POP, backdrops, fence wraps (non-perforated), street-pole banners (with proper hemming).

• Printing Tips: Use the correct ICC profile; test heat/UV settings; allow proper outgassing for solvent/eco-solvent before finishing.

• Finishing Tips: Avoid sharp folds; hem and grommet at recommended spacing; for frames, consider keder or reinforced hems.

• Installation Notes: Plan for wind loads; tension evenly to prevent edge curl.

• Handling & Safety: Heavy roll—team lift at 126 in width; wear clean gloves; acclimate material to the print room for best flatness.