Specifications

• Product: iohda Banner Frontlit Hulk Matte

• Construction: Coated PVC, frontlit (non-blockout)

• Weight:13 oz/yd² (≈ 440 g/m²)

• Face / Back: White matte face / white back

• Scrim / Weave: Polyester 1000 × 1000 denier, 18 × 18 threads

• Roll Size:63 in × 150 ft (1.60 m × 45.7 m)

• Ink Compatibility: Solvent, Eco-solvent, UV, Latex

• Finishing: RF/hot-air weldable; sewable; suitable for hems, grommets, pole pockets, and keder

• Environment: Indoor/outdoor signage; weather-resistant construction

• Storage: 64–77 °F (18–25 °C), 35–65% RH; keep in original carton/tube away from heat/sunlight

Highlights

• Low-Glare Readability: Matte surface improves viewing under bright light and for photography.

• High-Strength Base:1000×1000, 18×18 scrim resists tearing on demanding outdoor installs.

• Smooth Print Surface: Coated face yields high-density color and clean gradients.

• Wide Format Efficiency:63 in width helps reduce panel seams on large graphics.

• Finishing Ready: Welds cleanly; edges hold hems and grommets without fraying.

Use & Details

• Applications: Event and building banners, retail POP, wall murals, fence banners (non-perforated), stage/backdrops.

• Printing Tips: Use the correct ICC profile per ink set; test heater/UV settings; for solvent/eco-solvent allow proper outgassing before finishing.

• Finishing Tips: Avoid sharp folds; hem and grommet at recommended spacing; for tensioned frames, consider keder or reinforced hems.

• Handling: Acclimate the material before printing; handle with clean gloves to protect the print face.